Marki Microwave Acondicionamiento de señales

Resultados: 570
Seleccionar Imagen N.° de pieza
 Fabricante:
Descripción Hoja de datos Disponibilidad Precio: (CLP) Filtre los resultados en la tabla por precio unitario en función de su cantidad.
Cantidad RoHS Modelo ECAD Tipo de producto
Producto
Frecuencia
Banda de frecuencias
Régimen de voltaje
Impedancia
Estilo de terminación
Paquete / Cubierta
Temperatura de trabajo mínima
Temperatura de trabajo máxima
Empaquetado
Marki Microwave Acondicionamiento de señales The MBAL-0250CSP2 is a GaAs passive MMIC 1:2 balun that features excellent 35 dB common mode rejection over a 2 to 50 GHz operational bandwidth.
Hoja de datos
88En existencias
50En pedido
$319.316
$266.101
Min.: 1
Mult.: 1
Signal Conditioning Baluns 2 GHz to 50 GHz 2 GHz to 50 GHz 50 Ohms SMD/SMT - 55 C + 100 C Waffle
Marki Microwave PD-0530SMG
Marki Microwave Acondicionamiento de señales
Hoja de datos
4En existencias
$201.709
$201.686
$201.675
$201.663
Ver
Min.: 1
Mult.: 1
Signal Conditioning
Marki Microwave Acondicionamiento de señales The ABSD-10169PSM is a GaAs active MMIC balun in a 3mm QFN surface mount package. Its frequency ranges from DC to 30 GHz and offers 9 dB single ended to differential gain (low end limited by DC block).
Hoja de datos
15En existencias
$160.615
$133.854
Min.: 1
Mult.: 1
Signal Conditioning
Marki Microwave Acondicionamiento de señales The MPD4-0R404CSP2 is a small footprint MMIC 0.4-4 GHz 4-Way power divider/power splitter featuring high 20 dB isolation and 3.4 dB insertion loss in our compact CSP2 chip scale package.
Hoja de datos
40En existencias
$90.493
$75.409
Min.: 1
Mult.: 1
Signal Conditioning Power Dividers / Power Splitters SMD/SMT - 55 C + 100 C Waffle
Marki Microwave Acondicionamiento de señales The MFBP-00099PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00099PSM features a 9.0-10.4GHz 1dBc passband and 2.8dB center frequency insertion loss.
Hoja de datos
25En existencias
$146.465
$122.062
Min.: 1
Mult.: 1
Signal Conditioning
Marki Microwave Acondicionamiento de señales A high-power GaAs Schottky diode signal limiter featuring high IP3 over a broad DC-10GHz bandwidth. It offers low insertion loss and excellent return loss from DC through X band and has a typical 1 dB compression point of 11 dBm.
Hoja de datos
390En existencias
$92.726
$77.277
Min.: 1
Mult.: 1
Signal Conditioning 0 Hz to 10 GHz 0 Hz to 10 GHz 50 Ohms SMD/SMT - 55 C + 100 C
Marki Microwave Acondicionamiento de señales The MFBP-00060PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00060PSM is available as a 5x5mm plastic QFN.
Hoja de datos
25En existencias
$146.465
$122.062
Min.: 1
Mult.: 1
Signal Conditioning
Marki Microwave Acondicionamiento de señales The MPD-0422SCSP2 is a small footprint MMIC 4-22 GHz 2-Way power divider/power splitter featuring high 22 dB isolation and low 0.9 dB insertion loss in our compact CSP2 chip scale package.
Hoja de datos
159En existencias
$69.279
$57.738
Min.: 1
Mult.: 1
Signal Conditioning Power Dividers / Power Splitters 50 Ohms SMD/SMT - 55 C + 100 C Waffle
Marki Microwave Acondicionamiento de señales The MPD4-0422CSP2 is a small footprint MMIC 4-22 GHz 4-Way power divider/power splitter featuring high 30 dB isolation and low 1 dB insertion loss in our compact CSP2 chip scale package.
Hoja de datos
20En existencias
400Se espera el 28-12-2026
$128.169
$106.807
Min.: 1
Mult.: 1
Signal Conditioning Power Dividers / Power Splitters SMD/SMT - 55 C + 100 C Waffle
Marki Microwave Acondicionamiento de señales The MBAL-0220CSP2 is a GaAs passive MMIC balun featuring a frequency range of 2 to 20 GHz. This balun offers low 1.9 dB insertion loss as a mode converter, excellent balance and 27 dB common mode rejection in a compact 2.5 mm CSP2 chip scale package.
Hoja de datos
35En existencias
200Se espera el 08-01-2027
$229.405
$191.170
Min.: 1
Mult.: 1
Signal Conditioning Baluns 2 GHz to 20 GHz 2 GHz to 20 GHz 50 Ohms SMD/SMT - 55 C + 100 C Waffle
Marki Microwave Acondicionamiento de señales The MFBC-00003PSM family of passive MMIC surface mount bandpass filters are an ideal solution for small form factor, high rejection filtering. The MFBC-00003PSM is available as a 5x5mm plastic QFN.
Hoja de datos
17En existencias
$146.465
$122.062
Min.: 1
Mult.: 1
Signal Conditioning
Marki Microwave Acondicionamiento de señales The MPD2-00001PSM is a small footprint MMIC 0.4-4 GHz 2-Way Wilkinson power divider/power splitter featuring high 16 dB isolation and low 0.9 dB insertion loss in our compact DFN package.
Hoja de datos
73En existencias
25En pedido
$48.909
$40.763
Min.: 1
Mult.: 1
Signal Conditioning Power Dividers / Power Splitters SMD/SMT - 55 C + 100 C
Marki Microwave Acondicionamiento de señales The MFBP-00002PSM family of passive MMIC surface mount bandpass filters are an ideal solution for small form factor, high rejection filtering. The MFBP-00002PSM is available as a 4x4mm plastic QFN.
Hoja de datos
17En existencias
$146.465
$122.062
Min.: 1
Mult.: 1
Signal Conditioning
Marki Microwave Acondicionamiento de señales This equalizer provides 2.6 dB positive slope equalization from DC to 60 GHz with a DC attenuation value of 4 dB and a 50-ohm match maintained over the entire operating range.
Hoja de datos
1En existencias
$994.360
Min.: 1
Mult.: 1
Signal Conditioning
Marki Microwave Acondicionamiento de señales This equalizer provides 4 dB positive slope equalization from DC to 60 GHz with a DC attenuation value of 6 dB and a 50-ohm match maintained over the entire operating range.
Hoja de datos
1En existencias
$994.360
Min.: 1
Mult.: 1
Signal Conditioning
Marki Microwave Acondicionamiento de señales A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 9 GHz bandwidth.
Hoja de datos
87En existencias
$373.204
$319.886
Min.: 1
Mult.: 1
Signal Conditioning Baluns 500 kHz to 9 GHz 500 kHz to 9 GHz SMD/SMT
Marki Microwave Acondicionamiento de señales The MPD-0422FCSP2 is a small footprint MMIC 4-22 GHz 2-Way power divider/power splitter featuring high 24 dB isolation and low 0.7 dB insertion loss in our compact CSP2 chip scale package.
Hoja de datos
8En existencias
50Se espera el 28-12-2026
$69.279
$57.738
Min.: 1
Mult.: 1
Signal Conditioning Power Dividers / Power Splitters 50 Ohms SMD/SMT - 55 C + 100 C Waffle
Marki Microwave Acondicionamiento de señales The MPDR-0070CSP2 is a small footprint mmWave MMIC DC-70 GHz 2-Way resistive power divider/power splitter featuring low 1.5 dB insertion loss in our compact CSP2 chip scale package. It is much smaller than a printed PCB Power Divider/Combiner.
Hoja de datos
4En existencias
25Se espera el 05-01-2027
$183.104
$152.583
Min.: 1
Mult.: 1
Signal Conditioning Power Dividers / Power Splitters SMD/SMT - 55 C + 100 C Waffle
Marki Microwave Acondicionamiento de señales The MPD-0R402SCSP2 is a small footprint MMIC 0.4-2.5 GHz 2-Way power divider/power splitter featuring high 20 dB isolation and low 1 dB insertion loss in our compact CSP2 chip scale package.
Hoja de datos
45En existencias
50Se espera el 19-11-2026
$48.909
$40.763
Min.: 1
Mult.: 1
Signal Conditioning Power Dividers / Power Splitters 50 Ohms SMD/SMT - 55 C + 100 C Waffle
Marki Microwave Acondicionamiento de señales MC16-0222SM is a MMIC 2-22 GHz Directional Coupler. Passive GaAs MMIC technology allows production of smaller constructions that replace larger form factor circuit board constructions. The MC16-0222SM is available as a 4 X 4 mm QFN package.
Hoja de datos
44En existencias
$119.419
$99.516
Min.: 1
Mult.: 1
Signal Conditioning Couplers 2 GHz to 22 GHz 2 GHz to 22 GHz SMD/SMT - 55 C + 100 C
Marki Microwave Acondicionamiento de señales MPD-0226SM is a MMIC 2-way Wilkinson power divider. Passive GaAs MMIC technology allows production of smaller constructions that replace larger form factor circuit board constructions. The MPD-0226SM is available as a 4 X 4 mm QFN package.
Hoja de datos
70En existencias
$119.601
$99.664
Min.: 1
Mult.: 1
Signal Conditioning Waffle
Marki Microwave Acondicionamiento de señales A broadband MMIC LO buffer amplifier that efficiently provides high gain and output power over a 20-55 GHz frequency band. It is designed to provide a strong, flat output power response when driven with an input power at 0 dBm.
Hoja de datos
2En existencias
$1.715.293
Min.: 1
Mult.: 1
Signal Conditioning 20 GHz to 55 GHz 20 GHz to 55 GHz Connector - 40 C + 85 C
Marki Microwave Acondicionamiento de señales A high power type N-connectorized bidirectional coupler capable of operation to 18 GHz. This coupler features a unique air-line construction that simultaneously enables extremely low loss and high directivity.
Hoja de datos
3En existencias
$1.778.501
Min.: 1
Mult.: 1
Signal Conditioning Couplers 50 Ohms Connector - 40 C + 100 C
Marki Microwave Acondicionamiento de señales The CBR17-0026 offers the broadest bandwidth of any standalone bridge coupler on the market. It provides an extremely high degree of measurement accuracy for forward power measurements, and can also be used to measure VSWR/return loss.
Hoja de datos
2En existencias
$3.430.598
Min.: 1
Mult.: 1
Signal Conditioning 200 kHz to 26 GHz 200 kHz to 26 GHz Connector
Marki Microwave Acondicionamiento de señales The MMIQ-0416L is a low LO drive, passive GaAs MMIC IQ mixer. This is an ultra-broadband mixer spanning 4 to 16 GHz on the RF and LO ports with an IF from DC to 6 GHz.
Hoja de datos
1En existencias
$2.798.665
Min.: 1
Mult.: 1
Signal Conditioning Mixers Connector - 55 C + 100 C