Sombreros/placas complementarias Raspberry Pi Feeling fancy? Why not add a Top pHAT to your Pi pHAT stack? The SparkFun Top pHAT for Raspberry Pi is intended to be at the top of a pHAT stack so you won't find any pins for stacking on top of this board but that's ok because you will want to pre

Gabinetes para informática de una sola placa This MI:pro Protector Case for the BBC micro:bit has been designed to work with both the original micro:bit V1 and the micro:bit V2. These cases feature a four-layer construction style with ability to mount a 2xAAA battery pack to the back of the cas

Accesorios SparkFun UHF RFID Cable (TNC to RP-SMA)

Accesorios SparkFun Cherry MX switches are great for building your own keyboards. Whether you are looking to build a full sized 108-key keyboard your own 10-key or just a custom input for your computer Cherry MX switches give you that satisfying keyboard click. Now we

Accesorios SparkFun If you want to get some sound out of your project but have a tight space budget this is a good way to do it. This 0.5W 8Ohm speaker is only 40mm in diameter and just over 4mm thick the same kind you might find in one of those "talking greeting car

Accesorios SparkFun It's not what project you have in mind that may use a rocket launch switch... The question is what project will you come up with once you have one in hand? Everyone has a proverbial missile to launch. The hot red safety cover protects a toggle switc

Accesorios SparkFun Have you ever wanted to control something powerful or have you ever needed to turn on/off a high power device from your Arduino or another low powered microcontroller? The SparkFun Qwiic Single Relay provides you with the easiest to use relay yet. Th

Lentes para cámaras This is the 6mm CS-mount wide angle lens from CGL Electronics Co. Ltd. for use with the Raspberry Pi HQ Camera Module. The lens produces a 3MP picture in a 0.5in image format and is easily interchangeable using the thumb screw and adapter included wi

Accesorios SparkFun Alligator Test Leads Multicolored 10 pac

Accesorios SparkFun USB C is fantastic. But until we have converted all our hubs chargers and ports over to USB C this is the cable you're going to need. Supporting USB 3.1 speeds and charging up to 3A this 1 meter cable is perfect for high data rate transfers and ch

Accesorios SparkFun These are very bright LEDs. The LEDs are so bright that it hurts to look directly at them. Please take a look at the pictures to get an idea of the intensity. All lenses are clear.Features:Standard Size - T1 3/4 5mm10 000mcd brightness2.4V forward dr

Accesorios SparkFun This is a black plastic bezel custom made to mate with the silicon rubber pads. Black 1/8" ABS plastic. We use four 4/40-0.5" size screws matched with plastic standoffs to attach the 2x2 button pad and Simon project boards. Using two of these bezels